Family 2700
Type 2718
Type 2718
Device type · Individual type of the family 2700 Electrical Machines Series 2700
- Assignment
- Type of the series 2700
- Experiments
- 22 in 2 manuals
- As of
- 2026-09-06
Experiments in which type 2718 is used according to the component overview or the experiment text (titles, numbers and pages from the tables of contents; German manuals). All manuals and experiments
V 0015 Experiments with the four-quadrant drive Manual · 105 pages 10 experiments
Additional device in this manual View table of contents
- 3.3 Determining the firing pulses in operation without circulating current p. 27
- 3.4 Determining the firing pulses in operation with circulating current p. 31
- 3.5 Speed characteristic of the tachogenerator p. 35
- 3.7 Mean armature voltage and speed with resistive-inductive load in operation without circulating current p. 43
- 3.8 Mean armature voltage and speed with resistive-inductive load in operation with circulating current p. 47
- 3.9 Maximum motor speeds in operation without circulating current at different controller settings p. 51
- 3.10 Maximum motor speeds in operation with circulating current at different controller settings p. 54
- 3.11 Behaviour under speed steps with load and different controller settings p. 57
- 3.12 Transition from motor to generator operation p. 61
- 3.13 Transition from motor to generator operation with reversal of the direction of rotation p. 64
Other sections mentioning this product (4)
- 1.3.5 The speed controller p. 15
- 2.1.4 Isolation amplifier (Type 8630) p. 17
- 2.3.2 Setting the currents Imax. 1 and Imax. 2 of the four-quadrant drive (Type 5255) p. 20
- 2.3.4 Setting the maximum speed nmax. of the four-quadrant drive (Type 5255) p. 21
No experiment matches the filter.
V 0022 Experiments with the digital frequency inverter Manual · 120 pages 12 experiments
Additional device in this manual View table of contents
- 5.2 Effect of the braking chopper p. 42
- 6.1 Rotating field speed, no-load speed and no-load slip p. 44
- 6.4 Speed and slip with sinusoidal PWM p. 51
- 6.5 Speed and slip with trapezoidal PWM p. 56
- 7.1 Acceleration of a three-phase induction motor without load p. 61
- 7.2 Acceleration of a three-phase induction motor under load p. 64
- 7.3 Motion profile with DFUwin p. 68
- 8.1 Load-independent speed control p. 70
- 8.2 Speed control with setpoint step p. 73
- 9.2.2 Acceleration of a synchronous motor without load p. 80
- 9.2.3 Acceleration under load with sinusoidal PWM p. 83
- 9.2.4 Acceleration under load with trapezoidal PWM p. 86
No experiment matches the filter.
Type number and description are taken from the component overviews of the hps manuals. Only titles, numbers and pages of the experiments are shown, no manual contents.